QuickTreX® MTP® Premium Trunk Assemblies are built custom for your critical network. We start with genuine MTP® connectors from US Conec® and precision terminate them to genuine Corning SMF 28e+® Singlemode Laser optimized fiber. Our MTP® termination process delivers uniform height and positioning for maximum physical contact, consistently low insertion loss, and excellent return loss characteristics across the entire 12 fiber interface. These ruggedized assemblies transition to 2mm sequentially numerically labeled buffer tubes and simplex connectors (to your choosing). Our assemblies are proudly made in the USA by highly trained technicians. We have strict quality control measures in place so you can be certain your assembly will work perfect once installed.
Our outdoor assemblies are rated for almost all outdoor applications. This cable is suitable for underground installation inside conduit and pathways that are subjected to wide temperature variations or water infiltration, overhead lashed to a guide wire, or secured to a building or other permanent outdoor structure. The heavy duty polyethylene jacket is also UV rated so it can be exposed outdoors where there is no threat of rodent damage or blunt force damage.
Typical Applications Include:
Conduit installations between buildings with wide temperature variations or water infiltration
Campus Backbones
Lashed Aerial
UV Rated Polyethylene Jacket Rugged Jacket for Outdoor Use
All-dielectric gel-free cable construction requires no bonding or grounding
Fully waterblocked using craft-friendly, water-swellable materials
Excellent choice for towers, wind farm and other industrial applications
Features:
Genuine US Conec MTP Connectors (APC Polish Standard for Singlemode)
Genuine Corning Glass
Consistent Super Low Insertion and Return Loss
Polished & Tested in Accordance with ECI Standards & Specs
2mm Labeled Furcation Tubing on Breakout Strands
Staggard Connectors for Easy Installation
All Breakouts & Strands are Sequentially Labeled
Includes Full Test Report
Optional Heavy Duty Swiveling Pulling Eye
Made in the USA
Strict Quality Control
Fast Production Times
RoHS compliant
ISO 9001 Certified Manufacturing
This 288 fiber cable assembly will have (24) 12 Fiber MTP® Connectors on each end as shown below:
NOTE: MTP® is a Registered Trademark of US Conec Ltd. Clearcurve® is a Registered Trademark of Corning Corp.
Manage Your High Density Network with our MTP Fiber Optic Cable Assemblies, Fanouts, and Cassettes
At LANshack, we specialize in custom high density pre-terminated MTP® Trunks and Fanouts and also offer a full variety of MTP cassettes and enclosures to perfect your high density custom fiber optic installation. MTP or Multi-fiber Push-On Connectors include 12 or 24 fibers all in one connector. They are perfect for high denisty applicatoins often seen in data centers, campuses, or other similar commercial network settings. We offer pre-terminated MTP trunk assemblies from 12 fibers all the way up to 288 fibers. MTP Assemblies can be transitioned to standard fiber optic connectors with MTP/MPO cassettes or via a MTP adapter/coupler and MTP fanout cable. We also offer any jacket type including: indoor, indoor armored, indoor/outdoor, indoor/outdoor armored, outdoor OSP, outdoor armored OSP. These jackets types are designed to work with all installations whether it be indoor, underground conduit, direct burial, or overhead distribution. Our custom MTP trunk and fanout assemblies always include genuine US Conec connectors and unless otherwise stated Corning glass. They come to you fully tested with test report and offer a true plug-and-play solution for high density installations. Our custom assemblies are made to order in the USA with ISO certified manufacturing.
LANshack Easy Configurator Builder Tools
Configure your MTP Trunk and Fanout Assembly in seconds with our Easy Configurator Builder Tool.
LANshack MTP Assemblies, Cassettes, & Enclosures
At LANshack we offer a full MTP Solution for your High Density Applications and Installations including MTP Assemblies, Cassettes, and Enclosures. All Our MTP Trunk & Fanout Assemblies include Corning Glass and Genuine US Conec Connectors. We offer them in any jacket type.